1 bag of 4x Electrode Pads (80mm x 80mm)
Compex CoreBelt Electrodes
1 bag of 4x Electrode Pads (80mm x 80mm) exclusively made for the Compex CoreBelt range.
Position on the belt according to the placement markings outlined on the belt.
4x Electrode Pads (80mm x 80mm)
Exclusively made for the Compex CoreBelt range
Compex CoreBelt 1.0, 3.0 and 5.0
How to Place the Electrode Pads
The double sticky sides electrodes should be positioned on the belt according to the placement markings outlined on the belt. Open the pack of electrodes, remove the plastic from the grid pattern side.
- Abs session -> Front electrodes only
- Back session -> Back electrodes only
- Core session -> Front and Back electrodes
Stick the electrodes grid side down in-line with the outlines. At this point the visible side of the electrodes should be plain black.
We recommend placing the four electrodes, two on the front and two on the back, even if you stimulate only the abs or only the low back. Make sure that the metallic pins are completely covered by the electrodes.
Only use this device with electrodes recommended by Compex.